Lanier CW2200SP - Manual (Page 189)

Message Causes Solutions
"Data storage error." You tried to print a Sample
Print, Locked Print, Hold
Print, or Stored Print file, or
to store a file in the
Document Server when the
hard disk was
malfunctioning. Contact your service representative.
"Document Server is not
available to use. Cannot
store." You cannot use the
Document Server function. • For details about using Document
Server function, contact your
administrator.
• For details about how to set
permissions, see Security Guide
.
"Error has occurred." A syntax error, etc.,
occurred. Check that the PDF file is valid.
"Exceeded max. capacity of
Document Server. Cannot
store." The hard disk became full
after a file was stored. • Delete some of the files stored in
the Document Server.
• Reduce the size that you want to
send.
"Exceeded max. number of
files of Document Server.
Cannot store." The maximum file capacity
of the Document Server was
exceeded. Delete some of the files stored in the
Document Server.
"Exceeded max. number of
files to print for temporary /
stored jobs." While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum file capacity was
exceeded. Delete unneeded files stored in the
machine.
"Exceeded max. number of
files. (Auto)" While using the error job
store function to store
Normal Print jobs as Hold
Print files, the maximum file
capacity for file storage or
Hold Print file management
(automatic) was exceeded. Delete Hold Print files (automatic) or
unneeded files stored in the machine.
When Messages Are Displayed on the Control Panel
187