Lanier CW2200SP - Manual (Page 159)

Problem Causes Solutions
The paper cannot be easily
loaded into the paper
bypass location. The paper is curled
excessively. Before loading the paper, flatten out
the paper to remove the curl. For
details about loading paper into the
paper bypass location, see "Loading
Paper into the Paper Bypass Location",
Paper Specifications and Adding
Paper .
Cannot specify the paper
type and thickness when
loading paper. The [User Tools / Counter /
Enquiry] screen is currently
displayed. Switch to the [Copier] screen, the
[Document Server] screen, or the
[Printer] screen before loading paper.
For details about loading paper, see
"Loading Paper", Paper Specifications
and Adding Paper .
An error message remains,
even if misfed paper is
removed. • When a misfeed
message appears, it
remains until you open
and close the front
cover as required.
• Paper is still jammed in
the paper input
location.
After removing misfed paper, fully
open the front cover, and then close it.
For details about removing jammed
paper, see "Removing Jammed Paper",
Troubleshooting .
"Cover Open" remains
displayed. The paper input location
cover is not fully lowered. Press down on the paper input location
cover.
An error message remains
displayed even if the
indicated cover is closed. One or more covers that are
not indicated are still open. Close all the covers of the machine.
The paper input location
cover is held down by its
own weight and cannot stay
open. The magnet that holds the
paper input location cover in
place is covered with dust. Wipe the magnet with a soft dry cloth.
When You Have Problems Operating the Machine
157