Lanier CW2200SP - Manual (Page 191)

Message Causes Solutions
"HDD is full." When printing with the
PostScript 3 printer driver,
the hard disk capacity for
fonts and forms has been
exceeded. Delete unneeded forms or fonts
registered in the machine.
"HDD is full. (Auto)" The hard disk became full
while using the error job
store function to store
Normal Print jobs as Hold
Print files. • Delete unneeded files stored in
the machine.
• Reduce the data size of the
Temporary Print file and/or the
Stored Print file.
"I/O buffer overflow." An input buffer overflow
occurred. • In [Printer Features], under [Host
Interface], select [I/O Buffer],
and then set the maximum buffer
size to a larger value.
• Reduce the number of files being
sent to the machine.
"Information for user
authentication is already
registered for another user." The user name for LDAP or
Integration Server
authentication was already
registered in a different
server with a different ID,
and a duplication of the user
name occurred due to a
switching of domains
(servers), etc.. For details about User Authentication,
see Security Guide .
"Insufficient Memory" A memory allocation error
occurred. Only when using PostScript 3
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
"Memory Retrieval Error" A memory allocation error
occurred. Turn off the main power switch, and
then back on again. If the message
appears again, replace the RAM. For
details about replacing the RAM,
contact your service representative.
When Messages Are Displayed on the Control Panel
189