Lanier CW2200SP - Manual (Page 199)

Message Causes Solutions
"Exceeded time limit for
LDAP server search. Check
the server status." A network error has
occurred and connection
has failed. • Try the operation again. If the
message is still shown, the
network may be busy.
• Check that the correct settings for
LDAP server are listed in
[Administrator Tools] of [System
Settings]. For details about LDAP
server, see "Programming the
LDAP server", Connecting the
Machine/ System Settings .
"LDAP server authentication
has failed. Check the
settings." The user name and
password differ from those
set for LDAP Authentication. For details about LDAP Authentication,
see Security Guide .
"Memory is full. Cannot
scan. The scanned data will
be deleted." Because of insufficient hard
disk space, the first page
could not be scanned. • Wait for a while, and then retry
the scan operation.
• Reduce the scan area or scanning
resolution. For details about
changing scan area and scanning
resolution, see "Various Scan
Settings", Scan .
• Delete unneeded stored files. For
details about how to delete stored
files, see "Deleting a Stored File",
Scan .
"Memory is full. Do you
want to store scanned file?" Because there is not enough
free hard disk space in the
machine for storing in the
Document Server, only some
of the pages could be
scanned. Specify whether to use the data or not.
"Memory is full. Press
[Write] to write the current
scanned data to the memory
storage device, or press
[Cancel] to delete." The scan could not be
completed because there
was insufficient hard disk
memory at the time of saving
to the memory device. Select whether or not to save the
scanned document to the memory
device.
When Messages Are Displayed on the Control Panel
197