Lanier CW2200SP - Manual (Page 160)

Problem Causes Solutions
Original images are printed
on the reverse side of the
paper. You may have loaded the
paper incorrectly. Load paper into the paper bypass
location with the print side up. For
details about loading paper into the
paper bypass location, see "Loading
Paper into the Paper Bypass Location",
Paper Specifications and Adding
Paper .
Print is disabled. Ink has run out. Both Black & White and Color print are
disabled if only one of the four ink
colors runs out. Replace the print
cartridge before this happens. For the
replacement procedure, see
"Replacing Print Cartridges",
Maintenance and Specifications .
Print is disabled. The ink collector unit is full. Contact your sales or service
representative.
Misfeeds occur frequently. Using curled cut paper often
causes misfeeds or soiled
paper edges. • Load the paper up side down so
that the curled edges face
downward. For details about
recommended paper, see
"Recommended Paper", Paper
Specifications and Adding Paper
.
• Lay cut paper on a flat surface to
prevent paper from curling, and
do not lean it against the wall. For
details about the proper way to
store paper, see "Paper Storage",
Paper Specifications and Adding
Paper .
Misfeeds occur frequently. The paper is wrinkled or has
been folded/creased. • Cut folded or wrinkled areas off
the paper roll.
• Replace cut paper that is folded
or wrinkled.
9. Troubleshooting
158