Lanier CW2200SP - Manual (Page 195)

Message Causes Solutions
"Cannot start scanning.
Check the setting(s) on the
PC." Scan Profile might be
incorrectly configured. Check the Scan Profile configuration.
"Cannot write on the
memory storage device.
Check the memory storage
device and machine
settings." The memory device is faulty,
or the file name contains a
character that cannot be
used. • Check to see if the memory device
is defective.
• Check the memory device. It might
be unformatted, or its format might
be incompatible with this machine.
• Check the file name set at the time
of scanning. For details about the
characters that can be used in file
names, see "Specifying the File
Name", Scan .
"Cannot write on the
memory storage device
because remaining free
space is insufficient." • The memory device is
full and scan data
cannot be saved.
• Even if the memory
device appears to have
sufficient free space,
data might not be
saved if the maximum
number of files that can
be saved is exceeded.
• Replace the memory device.
• If the document is scanned as
single-page or divided multiple
pages, data already written to the
memory device is saved as is.
Replace the memory device, and
then press [Retry] to save the
remaining data, or press [Cancel]
to redo the scan.
"Cannot write on the
memory storage device
because the device is write-
protected." The memory device is write-
protected. Unlock the write-protection on the
memory device.
"Captured file exceeded
max. number of pages per
file. Cannot send the
scanned data." The maximum number of
pages per file has been
exceeded. Reduce the number of pages in the
transmitted file, and then resend the
file. For details about the maximum
number of pages per file, see "Storage
Function", Scan .
When Messages Are Displayed on the Control Panel
193