Lanier CW2200SP - Manual (Page 156)

Problem Causes Solutions
Nothing happens when the
[Check Status] key or the
[Energy Saver] key is
pressed. The main power switch is
turned off. Turn on the main power switch.
"Please wait." appears. This message appears when
you press the [Energy Saver]
key. Wait for a while. If the machine is not
ready in 10 minutes, turn off the main
power switch and make sure the main
power indicator turns off. Wait at least
10 seconds and then turn the main
power switch on again. If the machine
is still not ready in 10 minutes, contact
your service representative.
"Please wait." appears. This message appears when
the machine is warming up. • Wait until the message
disappears. Do not turn off the
main power switch while the
message is displayed.
• If the machine is not ready in 5
minutes, turn off the main power
switch and make sure the main
power indicator turns off. Wait at
least 10 seconds and then turn
the main power switch on again.
If the machine is still not ready in
5 minutes, contact your service
representative.
"Please wait." appears. The current environmental
condition is outside the
recommended temperature
range for the machine. • Check the optimum environmental
conditions for the machine and
move it to a different location.
• Leave the machine for a while
and allow it to adapt to the
environment.
For details about the optimum
environmental conditions for the
machine, see "Optimum Environmental
Conditions After Moving the Machine",
Maintenance and Specifications .
9. Troubleshooting
154