Lanier CW2200SP User Manual
Page 178
Advertising
7.
Select the paper input location of the paper feed you selected to adjust, and then press
[Adjustment].
8.
Enter the adjustment value with [ ] [ ], and then press [OK].
9.
Press [Exit].
To check the results of paper feed adjustment, print the test sheet again.
10.
Press the [User Tools/Counter] key.
• For details about Prevent Paper Abrasion mode, see p.161 "Checking Whether the Print-heads
9. Troubleshooting
176
Advertising
This manual is related to the following products: