Lanier CW2200SP - Manual (Page 209)

Message Causes Solutions
"Error has occurred in the
scanner driver." An error has occurred in the
driver. • Check whether the network cable
is connected correctly to the client
computer.
• Check whether the Ethernet board
of the client computer is
recognized correctly by
Windows.
• Check whether the client
computer can use the TCP/IP
protocol.
"Error has occurred in the
scanner." The application-specified
scan conditions have
exceeded the setting range
of the machine. Check whether the scanning settings
made with the application exceed the
setting range of the machine.
"Fatal error has occurred in
the scanner." An unrecoverable error has
occurred on the machine. An unrecoverable error has occurred
in the machine. Contact your service
representative.
"Insufficient memory. Close
all other applications, then
restart scanning." Memory is insufficient. • Close all the unnecessary
applications running on the client
computer.
• Uninstall the TWAIN driver, and
then reinstall it after restarting the
computer.
When Messages Are Displayed on Your Computer Screen
207