Specifying the length of copy paper cut, Synchro cut, Preset cut – Lanier CW2200SP User Manual
Page 57: Synchro cut preset cut
Specifying the Length of Copy Paper Cut
Specify the length to cut the paper loaded in the paper input location.
• You cannot cut the paper in the paper bypass location.
The following paper cut methods are available:
Synchro Cut
Cuts the paper at the same length as the original. If the copy is enlarged or reduced, the machine
calculates the appropriate length for the reduce/enlarge ratio and cuts the paper.
Preset Cut
Cuts the paper at a preset size, regardless of the size of the original. You can use this method to
copy different sized originals to the same size.
Variable Cut
Cuts the paper to the size entered.
Synchro Cut
Cuts the paper at the same length as the original. If the copy is enlarged or reduced, the machine
calculates the appropriate length for the reduce/enlarge ratio and cuts the paper.
1.
Press [Synchro Cut].
2.
Select Paper Input Location 1 or 2.
3.
Place the original, and start scanning.
Preset Cut
Cuts the paper at a preset size, regardless of the size of the original. You can use this method to copy
different sized originals to the same size.
Specifying the Length of Copy Paper Cut
55