Using windows print server as a network printer – Lanier CW2200SP User Manual
Page 70
4.
Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration:] window appears.
Windows 7, Windows Server 2008 R2:
1.
On the [Start] menu, click [Devices and Printers].
2.
Right-click the icon of the machine you want to use, and then click [Printer Properties].
3.
Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration:] window appears.
Using Windows Print Server as a Network Printer
Describes the driver installation procedure for Windows print server.
1.
Quit all applications. (Do not close this manual.)
2.
Insert the provided CD-ROM into the computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click [Run AUTORUN.EXE].
3.
Select an interface language, and then click [OK].
4.
Click [PostScript 3 Printer Driver].
5.
The software license agreement appears in the [License Agreement] dialog box. After
reading the agreement, click [I accept the agreement.], and then click [Next].
6.
Select the check box of the machine model you want to use.
7.
Double-click the machine name to display the machine settings.
8.
Click [Port :], and then click [Add] in the [Change settings for 'Port'] box.
9.
Click [Network Printer], and then click [OK].
10.
Double-click the computer name you want to use as a print server in the [Browse for
Printer] window.
11.
Select the machine you want to use, and then click [OK].
12.
Check that the port of the selected printer is displayed in [Port :].
13.
Configure the user code, default printer, and shared printer as necessary.
14.
Click [Continue].
The installation starts.
15.
Click [Finish].
Select one of the options to restart the computer either now or later, and then click [Finish].
4. Print
68