Lochinvar TISUN SCH-I-O - Manual (Page 31)

SCH Collectors Installation & Operation Manual
31
4
Collector Installation
(continued)
13. Remove the collector railing and install the Mechanical
Connection Kit (FIG.’s 4-13 and 4-14). Note: Be sure to
bend the tabs down on the Mechanical Connection Kit.
Figure 4-13 Remove Collector Railing
REMOVE COLLECTOR RAILING
Figure 4-14 Install Mechanical Connection Kit
BEND TABS DOWN
14. Reinstall the collector railing removed in Step 13
(FIG.
4-15).
Figure 4-15 Reinstall Collector Railing
REINSTALL COLLECTOR RAILING
OPTIONAL MECHANICAL
CONNECTION KIT
15. Install the side by side bracket using the square disks and
hex bolts provided in the kit (FIG. 4-16).
Figure 4-16 Install Side by Side Bracket
INSTALL SIDE BY SIDE BRACKET
16. Install the plug, sensor well and hydraulic connections to
complete the installation (see FIG.’s 4-17, 4-18 and
4-19).
Figure 4-17 Install Plug
Figure 4-18 Install Sensor Well
Figure 4-19 Install Hydraulic Connections
SENSOR
WELL EXPANSION
SET (HYDRAULIC
CONNECTION)
PLUG
EXPANSION
SET (HYDRAULIC
CONNECTION)
SCH Collectors Installation & Operation Manual
The Mechanical Connection Kit is an
optional kit available through the
manufacturer.
NOTICE