Pioneer RM V2550BU - Manual (Page 135)

125
ADJUSTMENTS
[2] <GRV> (GET RV CONV.DATA) — RED horizontal convergence data is output.
<GGV> (GET GV CONV.DATA) — GREEN horizontal convergence data is output.
<GBV> (GET BV CONV.DATA) — BLUE horizontal convergence data is output.
Format : Output in the following order.
1 STX (02H)
2 <
&00>/&V STATIC adjustment data (3 BYTE)
3 <
&06>/&V SKEW adjustment data (3 BYTE)
4 <
&12>/&V BOW
adjustment data (3 BYTE)
5 < &01>/&V SIZE adjustment data (3 BYTE)
6 < &02>/&V LINEARITY adjustment data (3 BYTE)
7 <
&07>/&V KEY adjustment data (3 BYTE)
8 <
&08>/&V SUB KEY
adjustment data (3 BYTE)
9 <
&13>/&V PIN
adjustment data (3 BYTE)
0 < &14>/&V SUB PIN adjustment data (3 BYTE)
- < &18>/&V 3D SKEW adjustment data (3 BYTE)
= <
&24>/&V 4D BOW adjustment data (3 BYTE)
~ <
&11>/&V 5D SKEW
adjustment data (3 BYTE)
! < &17>/&V 6D BOW adjustment data (3 BYTE)
@ < &03>/&V MID SIZE adjustment data (3 BYTE)
# <
&04>/&V MID LIN adjustment data (3 BYTE)
$ <
&23>/&V 5D SIZE
adjustment data (3 BYTE)
% < &29>/&V 6D LIN adjustment data (3 BYTE)
^ < &19>/&V 3D KEY adjustment data (3 BYTE)
& <
&20>/&V 3D S-KEY adjustment data (3 BYTE)
* <
&25>/&V 4D PIN
adjustment data (3 BYTE)
( < &26>/&V 4D S-PIN adjustment data (3 BYTE)
) < &09>/&V MID KEY adjustment data (3 BYTE)
_ <
&10>/&V MID S-KEY adjustment data (3 BYTE)
+ <
&15>/&V MID PIN
adjustment data (3 BYTE)
¡ < &16>/&V MID S-PIN adjustment data (3 BYTE)
™ < &21>/&V MID 3D KEY adjustment data (3 BYTE)
£ <
&22>/&V MID 3D S-KEY adjustment data (3 BYTE)
¢ <
&27>/&V MID 4D PIN adjustment data (3 BYTE)
∞ <
&28>/&V MID 4D S-PIN
adjustment data (3 BYTE)
§ ETX (03H)
(Note) & : R or G or B
[3]<GDD> (GET DEFLECTION DATA) — Deflection adjusting data is output.
Format : Output in the following order.
1 STX (02 H)
2 <HSI>/ H SIZE
adjustment data (3 BYTE)
3 <VST>/ V STATIC adjustment data (3 BYTE)
4 <VSI>/ V SIZE adjustment data (3 BYTE)
5 <VLI>/ V LINEARITY adjustment data (3 BYTE)
6 <VMS>/ V MID SIZE adjustment data (3 BYTE)
7 <VML>/ H MID LINEARITY adjustment data (3 BYTE)
8 <HBL>/ H BLK-L adjustment data (3 BYTE)
9 <HBR>/ H BLK-R adjustment data (3 BYTE)
0 <HPI>/ H PIN adjustment data (3 BYTE)
- ETX (03 H)