Pioneer RM V2550BU User Manual
Page 150
140
ADJUSTMENTS
[3] Adjusting the H SIZE
1) Enter the adjustment mode.
2) Press the
3
key to select [3. DEFLECTION ADJ].
3) Press the
5
key to select [H SIZE]. Then use the
2
/
–
and
/
3
+
keys to adjust the H SIZE.
The following can be adjusted using similar methods.
0
key : V STATIC
7
key : H BLK-L
2
key : V SIZE
8
key : H BLK-R
3
key : V MID SIZE
9
key : V MID LINEARITY
5
key : H SIZE
B
key : H PIN
6
key : V LINEARITY
D
key : GH LINEARITY
(is the same as GH LINEARITY in “4. CONVERGENCE ADJ”.)
[4] Adjusting the green horizontal size (GH SIZE)
1) Enter the adjustment mode.
2) Press the
4
key to select [4. CONVERGENCE ADJ] .
3) Press the
G
ADJ
ON/OFF
key until the OSD display becomes [GH].
The following can be adjusted in the same way.
R
ADJ
ON/OFF
key : RH
RV
B
ADJ
ON/OFF
key : BH
BV
4) Press the
2
key until the OSD display becomes [SIZE].
Then use the
2
/
–
and
/
3
+
keys to adjust the GH SIZE.
The following can be adjusted in the same way.
1
key :
STATIC
2
key :
3 SIZE 3 MID SIZE 3 5D SIZE
3
key :
3 LINEARITY 3 MID LINEARITY 3 6D LINEARITY
4
key :
3 SKEW 3 3D SKEW 3 5D SKEW
5
key :
3 KEY 3 MID KEY 3 3D KEY 3 MID 3D KEY
6
key :
3 SUB KEY 3 MID SUB KEY 3 3D SUB KEY 3 MID 3D SUB KEY
7
key :
3 BOW 3 4D BOW 3 6D BOW
8
key :
3 PIN 3 MID PIN 3 4D PIN 3 MID 4D PIN
9
key :
3 SUB PIN 3 MID SUB PIN 3 4D SUB PIN 3 MID 4D SUB PIN