Pioneer RM V2550BU - Manual (Page 67)

57
INSTALLATION AND ASSEMBLY
[Fig. 3-4-23]
[10] Adjust the positioning of the cabinets. [Fig. 3-4-8]
(Front/rear) Line up the wood surfaces of the front of the cabinets.
(Left/right) Form a cross on the center point where the 4 screens meet.
[11] Fix the connections between cabinets using bolts. [Fig. 3-4-21, 3-4-22]
Front M8x45 x 5 (provided with cabinets)
Rear M8x65 x 6 (provided with cabinets)
M8x45 x 2 (provided with cabinets)
[12] Attach the screen frame support brackets onto the bottoms of the cabinets using screws. [Fig. 3-4-10]
Screen frame support brackets x 6 (provided with screen frames)
Screws (4 dia. x 16) x 12 (provided with screen frames)
[13] Block the holes on the cabinets using light insulating stickers. [Fig. 3-4-11]
Light insulating stickers x 15 (provided with cabinets)
[9] Place the cabinet of the third stage on that of the second stage. [Fig. 3-4-22]
NOTE) Place the cabinet from the center position.
NOTE) To prevent hazard, never mount on a cabinet.