Pioneer RM V2550BU - Manual (Page 178)

168
MVP MANUAL
(5) To set the output to the NTSC mode [NT command]
(6) To set the output to standard RGB mode [NTR command]
(7) To set the output to the double-speed RGB mode [NTD command]
Input : NT , NTR , NTD
Explanation : • NT : Sets the NTSC input mode.
H : 15.734 kHz
V
: 59.94 Hz
Composite video, Y/C output
• NTR : Sets the standard speed RGB mode.
H : 15.734 kHz
V
: 59.94 Hz
• NTD : Sets the double-speed RGB mode.
H : 31.469 kHz
V
: 59.94 Hz
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)
(NOTE)
With the RMD-V2550BU, only standard speed input is possible.
(8) Optional variable scan board adjustment mode settings [:A command]
Input : : A
Explanation: • Used when adjusting the optional variable scan board (RMD-V3020).
• To exit the adjustment mode, omit the parameters and input : .
• For details on adjustments, refer to “VS Board Command Reference” on the following pages.