Pioneer RM V2550BU - Manual (Page 201)

191
MVP MANUAL
[D command]
Form: Dh1h2a
Function: Outputs the designated input on the designated screen while leaving the images on the other
screens as they are (‘distributed output’)
Explanation: h1h2 :Screen no. (00~03, FF)
00~03 :Designates the screen no.
FF
:Designates all of the screens
0 0 0 1
0 2 0 3
Screen no.
a: Image input (A, C, *)
A: Input port A (selects option port input)
C: Input port C (selects video input)
*: Inputs that have been selected for each output terminal
• The input port for RM-V1000N system processor video input is input port B
• Monochrome mode is usually cancelled, but by adding ‘B’ to the end of the command you can
execute the command while maintaining monochrome display.
• The output display is at a 1x1 magnification.
If you wish to designate the magnification, you should use the B command or the M command.
(Example)
D03B
Display the B output (at a magnification of 1) on screen no. 03.
NOTE
This command can be used only with input ports A and C in the case of the RMD-V3104U, RMD-V3104A
system and only with input ports A and B in the case of the RMV-1000N system. It is thus necessary to use the
command with image input compatible with the system being used.
Input port A B C
RMD-V3104U, RMD-V3104A system Can be used Can be used
RMV-1000N system Can be used Can be used