Pioneer RM V2550BU - Manual (Page 61)

51
INSTALLATION AND ASSEMBLY
[Fig. 3-4-16]
NOTE) With a 4-screen system
[4] Attach the other screen frame ass’y to the other cabinet in the same way as above.
[5] Adjust the positioning. [Fig. 3-4-16]
NOTE) 1. With the vertical joint, remove any clearance between horizontally adjacent screens.
(However, variance in parts may cause clearance up to about 2 mm.)
NOTE) 2. With the horizontal joints, make the formed lines straight.
If the horizontal joint is not straight after step [4], adjust the left and right heights by attaching a
height adjustment screw (M6x100, provided with each screen frame) to a screen frame support
bracket and turning it with a screwdriver.
Vertical joint
Horizontal joint
Vertical joint
Horizontal joint Horizontal joint
Vertical joint
NOTE) With a 9-screen system
M6x10
Height adjustment
Screen frame support bracket
MAX 20mm