Pioneer RM V2550BU - Manual (Page 84)

74
INSTALLATION AND ASSEMBLY
[Fig. 3-4-51]
3 Anchor bolt diameter
With both methods a and b in 2, use bolts with diameters of M10 or more.
4 L-shaped bracket thickness
The L-shaped brackets used with method b in 2 should be made of sheet iron with thickness of 4 mm or more.
5 Effective anchor thread length
The anchors and anchor bolds should have an effective thread length of 6.5 mm or more.
NOTE:
¶ Be sure to check the installation strength after anchor fixation. Otherwise the floor may fall out due to mistake
in installation mistake or defect in concrete material.
¶ For detailed dimensions and strength of the anchors, refer to their product catalogue, etc.
Pioneer will accept no responsibility for accidents or damage resulting from anchors or insufficient anchor
installation strength.
b. Fixing using L-shaped brackets
L-shaped bracket
Bolt
Anchor
L-shaped bracket
Bolt
Anchor