Perle Systems RIO 5500036-17 - Manual (Page 128)

RIO Remote I/O System User Guide
Installing RIO ISA Host Cards under Windows 2000
Page 128
Chapter 2 Installing hardware and software
5. Using the instructions given in the next table, use the Add/Remove Hardware Wizard to
assign the host card addresses and IRQ levels you require.
In this Wizard page Do the following...
6. In the Add/Remove Hardware Wizard, select
Add/Troubleshoot a device and press the
Next > button.
The Choose a Hardware Device page is now
displayed.
7. In the Choose a Hardware Device page,
scroll up the list of devices and click on
Add a new device , then click on the Next >
button.
The Find New Hardware page is now
displayed.
8. In the Find New Hardware page, select No, I
want to select the hardware from a list
and click on the Next > button.
The Hardware Type page is now displayed.
9. In the Hardware Type page, select
Multi-port serial adaptors and click on the
Next > button.