Perle Systems RIO 5500036-17 - Manual (Page 60)

RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 60
Chapter 2 Installing hardware and software
ISA cards 19.To configure ISA cards, at the Will you be installing ISA cards? prompt, select yes .
A prompt window now appears asking you for the number of ISA cards you are going to
install.
20.In the prompt window, use the up and down arrow keys to select the number of cards you
want and then press the Enter key to confirm your selection.
An address selection prompt is now displayed.
21.At the prompt, press either of the 1 , 2 , 3 , or 4 keys to select the card you want then press
the Enter key to confirm your selection.
The address field is now highlighted as shown in the next picture.