Perle Systems RIO 5500036-17 User Manual
Page 85
RIO Remote I/O System User Guide
Installing RIO under SCO UnixWare
Page 85
Chapter 2 Installing hardware and software
10.If you are happy with the configuration settings press the
ESC
key to close the window.
Otherwise, repeat step
onwards of this procedure to change the configuration as
required.
11.Press the
Esc
key twice
A prompt window is now displayed asking you if you want to save changes before exiting
config.rio.
12.In the prompt window, select
Yes
and press the
Enter
key.
The config.rio utility now closes down and the system is updated to use your new
configuration.
Note
The changes you have made to the system configuration will not take
effect until you exit the config.rio utility.
Hint
To save and update the configuration changes without exiting proceed as follows;
•
In the Main Menu, click on
Update configuration file
.