Perle Systems RIO 5500036-17 User Manual
Page 230
RIO Remote I/O System User Guide
SCO OpenServer 5 utilities
Page 230
Chapter 4 Quick Reference
View / edit TTY
>
Note this option is
only displayed after
the selected RTA has
been configured.
Enabled? >
TTY enabled
Allows you to connect a terminal
directly to the currently selected port
when enabled.
See also
.
Modem enabled
Allows you to connect a modem to the
currently selected port when enabled
(the associated transparent print
device will be enabled as well).
See also
.
Both disabled
Allows you to connect devices
other than terminals or modems to
the currently selected port.
See also
.
Getty entry
Selects the default getty entry in the
tty configuration.
See also
.
TTY type
Selects the type of terminal connected
to the current selected port.
Chars/sec
Sets the transparent print speed.
Force ixon
Forces software flow control on a port
when enabled.
Force -ixany
Some applications enable the
stty
ixany
feature which allows any
character to be accepted as an
xon
to the port.
By default, the RIO driver prevents the
use of
ixany
(that is, it sets the
-
ixany
flag), and this parameter is set
to
Yes
. To use
ixany
, set this field to
No.
Lock settings
Allows you to prevent the hardware
characteristics of a port being
changed. It also saves the port
settings across closes (but not across
reboots).
Menu option
Description