Perle Systems RIO 5500036-17 - Manual (Page 132)

RIO Remote I/O System User Guide
Installing RIO ISA Host Cards under Windows 2000
Page 132
Chapter 2 Installing hardware and software
3. In the Add New Hardware Wizard properties window, select the Resource type you
require and click on the Change Setting button.
The Edit Memory Range window is now displayed.
4. In the Edit Memory Range window, enter the memory range you want and click on the OK
button.
If values you have selected are not acceptable to the system, then the Device Manager
will display a problem icon as shown in the next picture.
5. If the memory settings you have selected are not acceptable to the system, check your
configuration settings and adjust memory address as required. Otherwise ring Technical
support.