Perle Systems RIO 5500036-17 - Manual (Page 50)

RIO Remote I/O System User Guide
Installing RIO under Solaris
Page 50
Chapter 2 Installing hardware and software
4. In the Admintool menu, click on Browse > Serial Ports
The Admintool window is now updated to show the serial ports available on the system as
shown in the next picture.
5. In the Admintool window, single click on the terminal you want to remove to highlight it.
6. In the Admintool menu, click on Select Edit > Delete .
The terminal entry for the serial port is now deleted and the Admintool window updated.
7. Repeat steps 5. to 6. until you have removed all the RIO terminal entries you require.