Perle Systems RIO 5500036-17 User Manual
Page 159
RIO Remote I/O System User Guide
Installing an ISA host card
Page 159
Chapter 2 Installing hardware and software
3. Turn off the power to your system and disconnect the mains supply.
4. Remove the system cover to expose the inside of the connector panel for host cards.
5. Insert the ISA card you want to install into a vacant host card slot and secure in place as
shown in the next picture.
6. Repeat step
until you have installed all the ISA cards you want.
7. Replace and secure the system cover.
8. Plug in the mains lead and turn on the power.
Installation of ISA host cards is now complete. For further details about installing host cards
including other types, see
.
Warning
Dangerous voltages exist inside computer systems. Before
installing host cards in your system, turn off the power supply
and disconnect the mains lead.
Caution
Full anti-static precautions should be taken when handling host
cards.