Perle Systems RIO 5500036-17 User Manual
Page 142
Advertising
RIO Remote I/O System User Guide
Installing RIO ISA Host Cards under Windows 2000
Page 142
Chapter 2 Installing hardware and software
8. In the card settings page, click on the
Identify On
/
Identify Off
toggle button to the
Identify On
setting.
9. In the card settings page, click on the RTAs you want to identify in the Connected RTAs
list highlighting them.
The LEDS on the selected RTA(s) now flash thus identifying the unit.
Note
To stop the LEDs flashing on an RTA, simply click on an RTA in the
Connected RTAs list to remove the highlight.
To disable this facility, click on the
Identify On
/
Identify Off
toggle
button to set the
Identify Off
setting. Highlighting RTAs in the list will
no longer have an effect.
Advertising