Perle Systems RIO 5500036-17 User Manual
Page 61
Advertising
RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 61
Chapter 2 Installing hardware and software
22.Using the keys shown in the next picture, set the address you want for the currently
selected host card. The press the
Enter
key to confirm your selection.
23.Press the
Enter
key to continue the installation.
A prompt is now displayed asking whether or not you want to re-enter hardware details.
24.At the prompt, select
no
.
Configuration of ISA cards is now completed.
0d0000
Coarse address setting.
Set with
up
and
down
arrow keys
Fine address setting
Set with
left
and
right
arrow keys
Advertising