Perle Systems RIO 5500036-17 - Manual (Page 75)

RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 75
Chapter 2 Installing hardware and software
7. In the pop-up window, use the up and down arrow keys to select the getty definitions
entry you want to use and then press the Enter key.
The TTY types menu is now displayed as shown in the next picture.
8. In the TTY types menu select the terminal type you want to attach to the tty and press the
Enter key to return to the tty menu.
9. In the tty menu click on Enabled? and press the Enter key.
The TTY en/disable menu is now displayed.
10.In the TTY en/disable menu, click on TTY enabled and press the Enter key to return to
the tty menu.
11.Press the Esc key three times to exit config.rio.