Perle Systems RIO 5500036-17 User Manual
Page 70
Advertising
RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 70
Chapter 2 Installing hardware and software
A popup window is now displayed showing the currently inactive RTAs.
6. In the pop-up window select the RTA you wish to remove and press the
Enter
key.
A confirmation prompt is now displayed, asking if you want to delete the selected RTA.
7. At the confirmation prompt, select
Yes
and press the
Enter
key.
8. Press the
Esc
key twice
A prompt window is now displayed asking you if you want to save changes before exiting
config.rio.
9. In the prompt window, select
Y
and press the
Enter
key.
Advertising