Pitney Bowes DM230L - Manual (Page 111)

6-8 SV61891 Rev. A
6 • Maintenance
3. Pull the brush out of the brush holder as shown here.
4. Wash the brush under running water. Replace the brush back in the
brush holder.
Remove the Holder and Wick (DM350L)
1. Remove the holder and wick from
the moistener assembly as shown
on the right.
2. Wash the holder and wick under
running water.
3. Replace the wick and holder.
1. Carefully slide the moistener assembly back into the system along the
guide bars until it snaps into place.
2. Replace the moistener container.
Reinstall the Moistener Container and Moistener Assembly (DM350L)
Moistener
assembly
Wick
Holder
Removing and
Cleaning the
DM350L
continued…