Pitney Bowes DM230L - Manual (Page 26)

SV61891 Rev. A 2-3
DM230L, DM330L, DM350L Operating Guide
1. IntelliLink TM Control Centre - Contains the operator display, keypad
and function keys for communicating with the mailing system and the
build in postage meter (Postal Security Device, PSD).
2. Operator Display - Shows the current status of your system and
prompts you through all setup operations.
3. Function Keys - Allow you to get information from the control centre
and tell it what to do. Refer to IntelliLink TM Control Centre - DM230L/
DM330L on page 2-8 for a description of each key.
4. Stacker Tray - The mailing machine neatly stacks finished mail piec-
es here.
5. Front Access Cover - Provides access to the printhead.
6. Printer Transport Release Lever - Pull the release lever forward to
lower the transport deck and clear a stalled mail piece. The transport
deck is interlocked; the mailing machine won't run when it's open.
7. Quick Reference Guide - This contains a summary of the most com-
mon operating procedures.
8. Feed Deck - Supports your envelope, post card or tape strip as it
passes under the printhead.
9. Moistener Release Button - This allows you to remove the moist-
ener from the mailing machine.
10. Moistener - Applies sealing fluid to the envelope flap when you select
sealing.
11. Tape Feeder (DM330L only) - Holds 50 tape strips for use on over-
sized letters and packages.
12. Alpha Keypad Cover - Open the cover to use the alpha keypad. You
use the keypad to assign names to accounts and custom presets.
13. Power Lamp Indicator - Lights when mailing machine is on. Also
flashes to indicate an error condition.
14. Numeric Keypad - Use numeric keypad to manually enter weight,
postage values, (eg: Corrections, Statement of Mailings / Manifests)
or creating names for accounting departments.