Pitney Bowes DM230L User Manual
Page 44
Advertising
SV61891 Rev. A
3-9
DM230L, DM330L, DM350L Operating Guide
5. For both sealing and non-sealing mode, place the envelopes on the
feed deck with the flaps down and facing the rear wall.
Shingle the envelopes so that the bottom envelope feeds first. All
envelopes should be the same size.
6. To feed oversized envelopes:
a. Lower both feed and side guides.
b. Guide the envelope along the feed
deck with your hand.
Make sure the envelopes are pressed up against the back wall of the
deck. Make sure the envelopes are making contact with the feed roller.
Feed roller
Feed guide (remains flat for most mail)
Side
guide
Processing and
Feeding Lettermail
on the DM350L
System
continued…
Advertising