Pitney Bowes DM230L - Manual (Page 50)

SV61891 Rev. A 3-15
DM230L, DM330L, DM350L Operating Guide
US Destinations
3. Press the Class button and then select Change Class (option 1). For
US destinations you must select USA Parcel (option 4) and then press
Enter to confirm.
4. Select your desired sub-class Expedited USA (option 1) or
US Xpresspost (option 2.) and press Enter to confirm. For more
information on Canada Post Distribution Services (shipping products
and services) log on to www.canadapost.ca.
5. The system will prompt you to enter a Zone. Key in the appropriate
Zone Code and press Enter to confirm.
6. Select any appropriate Special Services you desire by following the
prompts on the display. Once you have completed your selection the
system will take you to the Home screen. The postage value will be
displayed in the top right hand corner and the message “Ready to
Print” will be displayed below.
7. The procedures for printing postage for parcels varies depending on
which system you have:
a. DM230L – Insert a Tape Sheet into the Feeder to print your postage
and upon completion affix the postage indicia to your parcel.
b. DM330L / DM350L – Press the Tape button. Enter the number of
Tape Strips you want to print from the Tape Strip feeder and press
Enter to confirm. Upon completion affix the postage indicia to your
parcel.
Processing a
Parcel Using the
Optional Parcel
Rate Module
continued…