Pitney Bowes DM230L - Manual (Page 119)

6-16 SV61891 Rev. A
6 • Maintenance
Replacing the
Printhead
continued…
8. Open the latch and move it toward the
front of the machine (B).
C
B
9. Lift the old printhead up and out of the
well as shown (C).
CAUTION! Make sure the printhead nozzle points up to avoid
ink drips.
10. Remove the new printhead from its package.
11. Hold the printhead so the label faces the front of the mailing machine
(you can only install the printhead one way). Carefully push the new
printhead in position; press down as far as it will go.
12. Snap the printhead latch back in position.
13. Close the front cover.
14. Follow the prompts to restart the machine.
This completes the printhead installation.