Pitney Bowes DM230L - Manual (Page 132)

SV61891 Rev. A 7-13
DM230L, DM330L, DM350L Operating Guide
Blink Codes The power lamp on the left side of the mailing system base blinks when
the system detects an internal error. The number of blinks tells you what
kind of problem occurred.
You may be able to fix some problems by unplugging the mailing system,
waiting a few minutes, and then plugging it back in. If this does not fix the
problem, refer to the charts on the following pages for an explanation of
the blink codes.
Note the number of blinks. The lamp blinks a certain number of times,
pauses, and then blinks the same number of times. This pattern, called a
blink code, repeats until the problem is fixed.
If you need assistance, call technical support and tell the service
representative what blink code you saw.
Refer to the Contacts section at the front of this guide for more information
about technical support.
Power Lamp