Pitney Bowes DM230L - Manual (Page 47)

3-12 SV61891 Rev. A
3 • Running Mail
DM350L:
Printing Tapes 1. Push the tape load lever to the right as shown here and push the tapes
down into the slot. Place the tapes in the slot so that the backing faces
toward the left (toward the tape load lever).
2. From the Ready screen on the IntelliLink TM Control Centre, rate
your mail piece by weighing it on the optional weigh platform or by
entering the weight manually (press Class and then select Manual
Weight Entry). Then select a class for the mail piece and any desired
special services.
3. Press Enter to confirm the amount.
4. Press the Tape button. The display shows “Enter Number of Tapes”.
5. Type in the number of tapes to print.
6. Press the Tape button.
7. If the tape stalls in the feeder or printer area, refer to the Tape Feeding
Problems in Chapter 7 of this guide.
Tape load lever