Pitney Bowes DM230L - Manual (Page 49)

3-14 SV61891 Rev. A
3 • Running Mail
The following outlines the procedure for processing a parcel using
the optional Parcel rate module.
1. Place your mail piece on the integrated weigh platform or enter the
weight manually through the following steps:
a. Press the Class button and then select Enter Manual Weight
(option 6)
b. Enter the weight in kilograms and then press Enter to confirm
and the system will take you to the class selection option menu
(skip to step 3).
2. If you used the integrated weigh platform to weigh your mail piece
then press the Class button and select Change Class (option 1).
Additional sub-class selections and processing steps are required
depending on which class selection, and country destination
(Domestic, US, International) you select. The steps for the different
country destinations are outlined below.
Domestic (Canada) Destinations
3. Press the Class button and then select Change Class (option 1). For
domestic parcels you must choose either Domestic Parcel (option 2)
or Dom Priority (option 3.). Make your selection and then press Enter
to confirm.
4. Select your desired sub-class and press Enter to confirm. For more
information on Canada Post Distribution Services (shipping products
and services) log on to www.canadapost.ca.
5. Select which destination identifier you would like to use (Code / Zip or
Zone). Based on your selection you will need to enter the appropriate
Postal Code or Zone using the numeric keypad and / or QWERTY
keyboard. The system will prompt you when a valid entry is made.
Press Enter to confirm.
6. Select any appropriate Special Services you desire by following the
prompts on the display. Once you have completed your selection the
system will take you to the Home screen. The postage value will be
displayed in the top right hand corner and the message “Ready to
Print” will be displayed below.
7. The procedures for printing postage for parcels varies depending on
which system you have:
a. DM230L – Insert a Tape Sheet into the Feeder to print your post-
age and upon completion affix the postage indicia to your parcel.
b. DM330L / DM350L – Press the Tape button. Enter the number of
Tape Strips you want to print from the Tape Strip feeder and press
Enter to confirm. Upon completion affix the postage indicia to your
parcel.
Processing a
Parcel Using the
Optional Parcel
Rate Module