Pitney Bowes DM230L - Manual (Page 72)

SV61891 Rev. A 4-5
DM230L, DM330L, DM350L Operating Guide
Changing the
Automatic
Date Advance
Time Your system automatically advances the date at a time you specify.
The date advance time is factory set to 12:00 AM If your mail is picked up
at a certain time each day, you can set the system to advance the date at
the mail pickup time. You can also turn the auto date advance feature off if
you want.
1. Press the Options key.
2. Select Setup Menu, then Time of Day/Timer.
3. Select Auto Date Advance Time. The display asks you to enter the
time at which you want the date to advance.
4. Type in the time. Example: To enter one o’clock, type 1 - 0 - 0.
To enter 12:01 o’clock, type 1 - 2 - 0 - 1. (Do not type the hyphens.)
5. Press the Refill key for AM; press the Options key for PM. The display
shows the advance time.
NOTE: If you want to turn the date advance feature off, set the advance
time to 12:00 A.M.
Setting the
Normal Preset
Timer The normal preset is a set of values (postage, ad, account and so on) that
your control centre display automatically returns to after a set period of
time. You can set the amount of time the display takes before it reverts to
the normal preset.
1. Press the Options key.
2. Select Setup Menu, then Time of Day/Timer.
3. Select Normal Preset Timer.
4. The display asks you to enter the number of minutes before the
system returns to the normal preset.
5. Key in the value you want. You can enter a value from 1 to 10 minutes.
6. Press Enter. The display shows the time you entered.