Pitney Bowes DM230L - Manual (Page 85)

4-18 SV61891 Rev. A
4 • System Setup
Zero the
Scale Your attached scale should display 0 (zero) with no weight on it. To zero
the scale:
1. Press the Options key.
2. Select Zero Scale.
Selecting
the Scale
Vibration
Mode You can select how much time your system allows the scale to settle.
1. Press the Options key, then Setup Menu, then Basic Settings.
2. Press the Options key then select Scale/Rates Setup .
3. Select Scale Vibration Mode.
4. Select Normal Setting if your scale is located in a stable environment
isolated from vibration and other forces that could affect accuracy.
5. Select Adjust for Motion if your scale is in an environment subject to
vibrations such as air-conditioning vents or closing doors. If you select
this option, your scale will require more time to settle.