Panasonic WJ-FS616C - Manual (Page 15)

15
■ Mounting into the Rack
The video multiplexer can be mounted into the rack as
described below.
1. Remove the four rubber feet by removing the four
screws on the bottom of the video multiplexer.
2. Place the rack mounting brackets on both sides of the
video multiplexer and tighten with the four supplied
screws (M4 X10).
3. Install the video multiplexer with the rack mounting
brackets in the rack securing it with four screws (pro-
cured locally).
Cautions:
• The cooling fan inside the video multiplexer is sub-
ject to wear and needs to be replaced periodically.
• Do not block the ventilation opening or slots on the
cover to prevent the appliance from overheating.
Always keep the temperature in the rack within 45˚C
(113˚F).
• If the rack is subject to vibration, secure the rear of
the appliance to the rack by using additional mount-
ing brackets (procured locally).