Panasonic WJ-FS616C - Manual (Page 45)

45
OTHER SETUP MENUS
■ Camera Download
This item lets you save the camera setup data into the
memory of the video multiplexer.
If the setup contents of the camera should be lost due to
malfunctioning or replacement of a camera, you can simply
reload the data stored in the video multiplexer.
1. Move the cursor to the CAM DOWNLOAD parameter in
the SETUP MENU.
2. Select YES by pressing the A or B button, then press
the [HOME/SET] button.
The CAM DOWNLOAD table shown in the figure
appears on the monitor screen.
3. Select the channel you want to save by pressing the A
or B button.
1CH - 16CH: Enables storing of setup data for the
selected camera channel.
ALL: Enables storing of setup data for all camera chan-
nels.
Note: Channel numbers can also be input directly with
the Camera Number buttons.
4. Move the cursor to “NO” by pressing the C or D but-
ton.
5. Select “YES” by pressing the A or B button.
6. Press the [HOME/SET] button to begin loading.
“NOW LOADING” appears on the table.
To cancel loading, press the [SET UP/ESC] button.
7. When loading is finished, the result is displayed for
each channel.
8. Press the [SET UP/ESC] button, then system will restart.
Note: Alarm is disabled while this menu is displayed.
■ Camera Upload
This item lets you upload camera setup data from the video
multiplexer’s memory to a camera.
1. Move the cursor to the CAM UPLOAD parameter in the
SETUP MENU.
2. Select YES by pressing the A or B button, then press
the [HOME/SET] button.
The CAM UPLOAD table shown in the figure appears
on the monitor screen.
3. Select the channel you want to upload by pressing the
A or B button.
1CH - 16CH: Enables data uploading to a selected
camera.
ALL: Enables data uploading to all cameras.
Note: Channel numbers can also be input directly with
the Camera Number buttons.
4. Move the cursor to “NO” by pressing the C or D but-
ton.
5. Select “YES” by pressing the A or B button.
6. Press the [Home/SET] button to begin the load.
“NOW LOADING” appears on the table.
To cancel loading, press the [SET UP/ESC] button.
7. When loading is finished, the result is displayed for
each channel.
8. Press the [SET UP/ESC] button, then system will restart.
Note: Alarm is disabled while this menu is displayed.
CAM DOWNLOAD
DOWNLOAD 1CH NO
CAM 1 2 3 4 5 6 7 8
DATA O+ - O+ - - N- + -
CAM 9 10 11 12 13 14 15 16
DATA - - - - - - - -
O:RESULT OK +:DATA EXISTENCE
N:RESULT NG -:DATA NOTHING
CAUTION:ALL ALARM INPUTS
HAVE BEEN DISABLED.
CAM UPLOAD
UPLOAD 1CH NO
CAM 1 2 3 4 5 6 7 8
DATA O+ - O+ - - N- + -
CAM 9 10 11 12 13 14 15 16
DATA - - - - - - - -
O:RESULT OK +:DATA EXISTENCE
N:RESULT NG -:DATA NOTHING
CAUTION:ALL ALARM INPUTS
HAVE BEEN DISABLED.