Multiscreen 2 output setup – Panasonic WJ-FS616C User Manual

Page 34

Advertising
background image

34

Multiscreen 2 Output Setup

These items let you select the display mode when connect-
ing the Record Output (REC OUT) to the monitor for multi-
screen 2 monitor.

1. Move the cursor to the REC/MULTI2 parameter in the

SETUP MENU.

2. Select MULTI2 OUTPUT and then press the

[HOME/SET] button.
The MULTI2 OUTPUT SETUP menu as shown in the fig-
ure appears on the monitor screen.

3. Select the desired switching timing indicated as the

field interval (4 to 999) by pressing the A or B button.

Notes:

• Numbers can also be input directly with the Camera

Number buttons (1 - 10).

• Refer to the operating instructions of the VCR for

switching timing.
When MODE9 is selected in this table, select EXT1
or EXT4 by pressing the A or B button.

EXT1:

Enables spot image recording on the VCR.

EXT4:

Enables quad images recording on the VCR.

4. Press the [HOME/SET] button to move the cursor to the

right in the recording mode title column.
The square cursor appears in the character table.

5. To select a character, move the cursor on the desired

character in the table by pressing the C, D, A, or B
buttons.

6. Press the [HOME/SET] button to pick up the character

and place it in the title column.

7. Repeat steps 5 and 6 above to edit the title.

8. If a wrong character is selected, press the - or +

button to move the cursor in the title column.

Note:

Press the + button to move the cursor to the right,

or press the - button to move the cursor to the left.

Then press the [HOME/SET] button to overwrite the
character with the character selected from the table.

9. Press the [SET UP/ESC] button. The cursor moves to

MODE number.

10. Repeat steps 1 to 9 above to assign the other MODE

numbers.

11. After completing the setting, press the [SET UP/ESC]

button to return to the REC OUTPUT SETUP menu.

12. After finishing the setting, press the [SET UP/ESC] but-

ton to return to the previous SETUP MENU.

WJ-FS616C SETUP MENU

ALARM SETUP *
MULTI OUTPUT SETUP *
SPOT OUTPUT SETUP *
REC/MULTI2 MULTI2 OUTPUT *
SYSTEM SETUP *

CAM DOWNLOAD NO
CAM UPLOAD NO
ALL RESET SELECT *

MULTI2 OUTPUT SETUP

DISPLAY POSITION *
SEQUENCE MODE SEQ2

Advertising