Panasonic WJ-FS616C - Manual (Page 21)

21
■ Spot and Multiscreen Monitor
The WJ-FS616C video multiplexer can be connected to
two monitors.
The monitor displays the video signal according to the
connection made, as shown below.
Spot Monitor: The monitor that is connected to the
SPOT OUT connector on the rear of the video multi-
plexer.
It only displays the camera input in single spot or
single sequence.
Displaying the VCR playback is disabled.
Multiscreen Monitor: The monitor that is connected to
the MULTISCREEN OUT connector on the rear of
the video multiplexer.
It can displays the camera input in multiscreen
mode (4, 7, 9, 10, 13, 16 screen segments).
It also displays the VCR playback images.
In addition, the video multiplexer can be connected to
the other additional monitor, if the system is required.
Connect the monitor (substituted for VCR) to the REC
OUT connector on the rear of the video multiplexer.
Multiscreen 2 Monitor: It has functions as same as the
multiscreen monitor.
Pressing the MULTISCREEN button alternately
selects multiscreen output or multiscreen 2 output.
The indicator blinks to indicate that the multiscreen
2 output is selected.
MONITORS AND DISPLAYS
SPOT REC OUT MULTISCREEN OUT
OUT I N S–VIDEO VIDEO
Video Multiplexer
WJ-FS616C
S–VIDEO VIDEO
ON OFF
POWER ON OFF
POWER