Displaying the camera and playback images – Panasonic WJ-FS616C User Manual
Page 54
54
3. Press the [FUNCTION] button. The indicator in the but-
ton starts to blink.
4. Select the playback channel you want to display by
pressing the corresponding [1 – 16] button.
The indicator in the [FUNCTION] button lights, and the
selected playback image is displayed in the upper left
segment of the multiscreen.
5. To display another playback image, press the [FUNC-
TION] button.
The indicator in the button starts to blink.
Select the channel you want to display by pressing the
corresponding [1 – 16] button.
6. To return to the camera images multiscreen, press the
[MULTISCREEN SELECT] button.
Or to display the playback image in single spot mode,
press the [VCR/CAM] button.
Note:
To return to the previous camera images multi-
screen, press the [FUNCTION] button while the
indicator in the button is blinking.
3. To return to single spot monitoring, select an image to
be displayed by pressing a [1 – 16] button.
Or to return to screen segments display, press the
[MULTISCREEN SELECT] button.
Note:
The same channel cannot be displayed in multi-
ple segments.
If this attempt is made, only the image of the chan-
nel with the lowest number is displayed; the other
segments appear black out.
■
Displaying the Camera and Playback
Images
The following procedures are not applicable to the
Multiscreen 2 Monitor.
• One segment of the multiscreen for camera images can
be assigned to playback.
• This function is available with the 4-, 7-, 10- or 13-seg-
ment multiscreen modes.
• The playback image will be displayed in the upper left
segment of the multiscreen.
• This function is not available when S-VIDEO playback
input is used.
To enable this function, connect with the VIDEO play-
back input at the same time. The VIDEO playback
image is displayed automatically without making any
setting changes.
●
Multiscreen Spot
(Live Images with a Playback Image)
1. Select the cameras live mode (indicator off) by pressing
the [VCR/CAM] button.
2. Select the screen segments to be displayed on the
monitor by pressing the [MULTISCREEN SELECT] but-
ton repeatedly.
Confirm that the 4-, 7-, 10- or 13-segment multiscreen is
selected for the camera images.
If not, press the [MULTISCREEN SELECT] button
repeatedly until the desired multiscreen appears.
VCR
CAM
1
2
3
4
5
6
7
8
9
10 11 12 13
1
2
3
4
5
6
7
8
9 10
1
2
3
4
5
6
7
1
3
2
4
FUNCTION
Camera
1
Camera
2
Camera
3
Camera
4
Playback
Camera
2
Camera
3
Camera
4