Preface, Features – Panasonic WJ-FS616C User Manual

Page 5

Advertising
background image

5

PREFACE

The WJ-FS616C Video Multiplexer is designed to multiplex
the field signals from video cameras and record the camera
images on a time lapse VCR.
Up to 16 cameras can be connected to the unit for monitor-
ing images in multiscreen, sequence, freeze or electronic
zoom mode on a video monitor screen.

The WJ-FS616C Video Multiplexer allows you to control
camera functions such as lens focussing, zooming, and iris,
positioning of the pan/tilt head, etc. This makes the system
highly flexible and sophisticated, and allows expansion to
up to 64 cameras.

FEATURES

• The images of any connected camera can be displayed

on full screen or on a 4, 7, 9, 10, 13 and 16 multiscreen
as shown below.

(7, 10 and 13 multiscreens are not available for play-
back images.)

In addition, one playback image can be displayed with
camera images in 4, 7, 10 and 13 multiscreens.

• The pattern of a spot sequence consisting of up to 32

steps can be programmed by presetting the channel
order and individual dwell time.
The pattern of a 4, 7, 9, 10, 13, or 16 multiscreen
sequence consisting of up to 5 steps can be pro-
grammed as shown below.

• Electronic zoom and freeze image functions are avail-

able. The zoom area can be selected with the direction
buttons.

• Up to 16 camera images multiplexed by the field rate

are available at the REC OUT connector for recording
on the time lapse VCR. Alarm priority recording is sup-
ported.

• Camera functions such as pan/tilt, lens zoom, focus

and iris, and camera setup can be controlled via a
coaxial cable or RS-485 interface.

• The WJ-FS616C has a versatile alarm mode to optimize

its multiscreen output, spot output, and record output.

• REC, PLAY, REW, FF, etc. can be controlled from the

front panel of the video multiplexer, via the RS-232C
interface or the wired remote control terminal of the
Panasonic Time Lapse VCR.

• The WJ-FS616C can be controlled from a PC or the WV-

CU550C and WV-CU360C System Controller via RS-
232C or RS-485 interface.

2 sec

2 sec

5 sec

3 sec

1 sec

4 sec

4-SEGMENT

SCREEN

7-SEGMENT

SCREEN

9-SEGMENT

SCREEN

10-SEGMENT

SCREEN

13-SEGMENT

SCREEN

16-SEGMENT

SCREEN

Advertising