Panasonic WJ-FS616C - Manual (Page 36)

36
SYSTEM SETUP
The procedure described below let you determine the sys-
tem designation and display the system status.
1. Move the cursor to SYSTEM SETUP in the SETUP
MENU and then press the [HOME/SET button.
The SYSTEM SETUP menu as shown in the figure
appears on the monitor screen.
2. Press the [FUNCTION] button to display the next page
of the menu. Press this button again to return to the pre-
vious page of the menu.
■ Clock Setup
This item lets you set the current time and date.
1. Move the cursor to CLOCK SETUP in the SYSTEM
SETUP menu and then press the [HOME/SET] button.
The cursor moves to the right editing area.
2. Select the month by pressing the A or B button.
3. Move the cursor to the right by pressing the C or D
button, then select the date by pressing the A or B
button.
4. Select the last 2 digits for the year and time (military
time) as similarly by pressing the C or D button and
the A or B button.
5. After completing the setting, press the [SET UP/ESC]
button to move the cursor to CLOCK SETUP.
The selected time and date are updated when the [SET
UP/ESC] button is pressed.
■ Clock Display Position
This item lets you select the position where the clock will be
displayed on the monitor screen.
1. Move the cursor to CLOCK POSITION in the SYSTEM
SETUP menu and then press the [HOME/SET] button.
The position setting menu shown in the figure appears
on the monitor screen.
2. Move the clock position by pressing the C, D, A or B
button.
Note: In the multiscreen display with the multiscreen
output or record output, the clock display is shifted
one line from the preset position if the camera title
and the clock are preset to the same position.
3. Press the [SET UP/ESC] button to execute the selection
and return to the previous SYSTEM SETUP menu.
WJ-FS616C SETUP MENU
ALARM SETUP *
MULTI OUTPUT SETUP *
SPOT OUTPUT SETUP *
REC/MULTI2 REC OUTPUT *
SYSTEM SETUP *
CAM DOWNLOAD NO
CAM UPLOAD NO
ALL RESET SELECT *
SYSTEM SETUP 1 OF 2
CLOCK SETUP JAN 1.97 0:00
CLOCK POSITION *
TITLE SETUP *
TITLE POSITION *
SEQUENCE SETUP SEQ1 *
SEQ TIMING-MLT INT(TIME-ADJ)
SEQ TIMING-SPT INT
LOCK MODE ALL
SYSTEM SETUP 2 OF 2
CABLE COMP/VD2/DATA SETUP *
ALM TERMINAL SETUP *
PLAYBACK MODE FIELD
DATA MODE CU
RS-232C MODE VCR
COM PORT SETUP *
VCR IN SELECT VIDEO
DAISY MODE OFF
UNIT ADDR.SET 1
PASSWORD OFF
DEC11.96 12:00:00
CAMTITLE