Pioneer PDV-LC10 - Manual (Page 105)

Advanced Functions
105
En
ADV
ANCED FUNCTIONS
English
1
From the “Other” tab on the
setup screen, select “Change
Angle”, then press the cursor
button (
3).
2
Use the cursor buttons ( 5/∞)
to select the angle, then press
the ENTER button.
Main unit
Remote control unit
Operation on the setup screen
Turning the display of the angle mark on and off
Set whether or not to display the mark on the screen during playback. Press
the SETUP button to display the setup screen, then operate as described under
“Making settings using the setup screen” on pages 60 and 61. Switch the
setup screen to the expert mode before making this setting. (Page 62)
Angle indicator setting
• On: The mark is displayed on the
screen.
• Off: The mark is not displayed on
the screen.
This setting can be changed during
playback.
Settings: On*
Off
*Factory setting
2(/3)
Change Audio
Change Subtitle –
Change Angle
Title Search –
Chapter Search –
1: English
Change OSD –
2(/3)
Audio1 General Language Other Video 2
Exit SETUP Select ENTER
Off
1/1
1: English
3(/23)
+/–
Move
Angle Indicator
Normal
Picture Quality –
Still Picture –
TV Screen –
Audio1 General
On Screen Diplay –
Language
OSD Position –
Other Video 2
Move Exit SETUP
Standard
Field
On
On
Off
Off
4
1 3 ¡
¢
1, 2
1
1
1, 2
2