Pioneer PDV-LC10 - Manual (Page 74)

74
En
ADV
ANCED OPERA
TIONS
Various Digital Signal Settings
Use the setup screen to make the “Audio 2” settings. Press the
SETUP button to display the setup screen, then operate as described
under “Making settings using the setup screen” on pages 60 and
61.
Adjusting the quality of Dolby Digital signals
Here adjust the quality of the Dolby Digital audio signals which offer a wide
dynamic range. Switching the audio DRC (dynamic range compression) setting
makes dialogues that are hard to hear when played on AV systems or TVs easier
to understand.
• Large: The effect is maximum.
• Medium: The effect is relatively
strong.
• Small: The effect is minimum.
• Off: Dynamic range compression is
turned off.
This setting can be changed during
playback.
Settings: Large
Medium
Small
Off*
*Factory setting
Move Exit SETUP
i
Audio1 Audio2 General Language Other Video
Audio DRC Large
Medium
Small
Off
Dynamic playback at low volume