Pioneer PDV-LC10 - Manual (Page 38)

38
En
BEFORE USING
Using the Battery
Battery pack operation
1
Attach the battery pack to the
battery case.
1 Fit the terminal side of the battery
pack into the battery case.
2 Push in until it clicks.
2
Attach the player to the
battery case.
1 Align the guide hole on the rear of the
player with the rear guide on the
battery case.
2 Push in the front part of the player
until it clicks.
3
Set the power switch of the
player to ON.
• Now the player can be operated.
• When the battery pack is fully charged,
the player can play DVDs for about 3
hours and 30 minutes continuously.
• If the power is switched on while the
battery pack is not fully charged, the
player operation may sometimes
become unstable. Be sure to charge
the battery pack fully before use.
Attaching the battery pack and player (PDV-LC10 only)
Attach the battery pack and player to the battery case as described below.
1
2
1
2
HOLD ON/OFF
1
2
3